Видео

Sounds like the instrument Arlo Guthrie uses, are you going to add ADSR. Fantastic project thanks.

❤❤❤

Really interesting. 🤍

THIS GOOD

Thanks for the tutorial!! Do you know if it works for the canon S100 by any chance ? ☀️✨

I have the 270, the butterfly . I bought it when I was 18 in 1978. .it has been at my mother's house since 1978. But since you are saying it's so rare, I need to get it before something happens to it and bring it to my place.

For a sec i thought it would be real (cmd)

Nice kit! Great instructions.

epic

YAY this worked god bless u i can keep slaying w my digital pictures thanks to you ❤❤❤

Hii , i have Korg microkey 2 :( i want to switch velocity off , i don't need it :( please help me :(🙏🙏🙏

Great video ! Horrible music!

not the same as the SD800 powershot dangit! 1 minute to take cover off but no spring. I dropped my camera while turned on and lens only closes half way and it gives the 'lens problem' message and to restart.

I’m looking at my camera and what is a carriage? What am I specifically supposed to push and then pull back

2024 coming back. Must say that I've progressed really far

This is first time ever I am commenting on someone's video. I must say you make my day. I was checking all video's and open camera cables connectors and clean them and finally gave up and close it. Then I saw this video and it make sense to me and I tried and it worked. Thanks man, after 7 years it's still very very helpful.

my parents bought this nearly 6 to 8 years ago had a lot of pictures in it so i just went on yt saw this tried it and wow its back lol in use after a long time thx man

Dude fuck yes!!! ❤❤❤❤

Es todo una joya el órgano! Muy bueno, saludos

Hi. I have a Power Shot that was on a beach blanket out of its case and suffered some sand being kicked at it. Lens wouldn't come out and the iris lens protector wouldn't close completely. With lots of compressed air, I succeeded in getting the lens to extend and return, but the iris lens protector still won't close more than half way. Would removing the cover give me a chance to blow out the remaining dust? How do I remove the cover? Love your site, no camera shop will do repairs to these, they want to just sell you a new one. Thank you!

The bottom would help resonance, I would think.

THANK YOU!!!

How did you get the lens to go back in?

this looks like Source Engine, change my mind.

Damn, you're from Rochester? Me too. Small world.

The tone generators in all Wurlitzer electric pianos are called REEDS, not tines. A Fender Rhodes uses tines. Very different

Enjoyed your video. I remember an M3 in a military chapel my family used to attend and was my first exposure to Hammond organs. I read somewhere that these organs were designed for the military hence their more ‘portable’ size. One detail though, I think the M3 has 86 tonewheels - the bigger consoles have 96 if I’m not mistaken.

This Video Makes Me Want o Build My Workshop SOOO BAD In My Shack ;( Sadly Im Disabled ANd I Can`t Do It By Myself And Im Poor :( Damn. ;(

I mean, this looks pretty cool and all, but how do I use it to make viral TikTok videos?

HOW DO YOU OPEN FILES!?

Hey bro awesome ! Ive been having lots of learning about white noise and triggering lately, still I haven't made a white noise circuit yet that's simple, do U have any schematic ideas so I could make one ? :)

Your un-enthusiastic, ANNOYING WIFE, her God awful accent and non supportive tones are all the reasons why your channel has gone NO WHERE!!! EXACTLY WHY THIS VIDEO HAS 600 VIEWS AND 2 COMMENTS AFTER BEING UP FOR 11 YEAR!! Hopefully you ditched her, she be holdin' ya back!

Yea. Being the last comment was 9 months ago, I will be the second of 2022 saying good job guys. At least Eww tube put it in my Alg today. Thanks for the upload.

PRECISO DE AJUDA

I just bought an M3 and so far it seems pretty clean. I've found 2 dead keys on 1 drawbar so I will look for those broken wires. This was very concise and helpful. Thank you!

This is pretty cool. Is it possible how you got the proper electrical stuff working?

Do one of these walkthroughs for cyphercon 5 please

Miss these Beautiful voices

I have the exact Wurlitzer 270 Butterfly electric piano that I may be interested in selling. What do you think it is worth? Thanks!

Just got one of these pianos for free! I need to replace the speakers though…

The quality level of carvewright has decreased dramatically. After three attempts to repair, I returned, and they charged me a return fee of $480.00. Carvewright has some of the poorest customer service I've ever experienced, don't waste your time on such a low quality piece. It's better to learn a real CNC then to try to save a dollar with a low-quality piece like carvewright

Modular at the component level. You guys are great, thanks for sharing this!

Relating to the circuit design and in contrast to that in the data sheet (which is quite worse): 1. I would not touch the inputs of the LM386 with any dc connections because the differential amplifier is allready ground referenced with 50 kOhm and it is good as it is. So there should only be dc decoupling capacitors 1µF to ground at the inverting input and 1 µF to the input signal at the non-inverting input. The right place for the volume potentiometer is between input signal and ground with the wiper to the input dc decoupling capacitor. 2. A good grounding of pin 4 is essential. This connection to ground must be as short as possible. Also the return line of the speaker should be as close as possible to this ground point. The input ground should have a separate path to this point. In order to provide a link for the ac current there should be a 0.22 µF capacitor as short as possible between pin 6 and pin 4. pin 6 should also be grounded by an electrolytic of 220 to 470 µF. 3. The Zobel cell should be designed with 10 Ohm and 47 nF, better with 100 nF, to set the roll-off point closer to the audio range. The output electrolytic should be 1000 µF for 8 Ohm speaker impedance. Operation at 4 Ohm speakers should be avoided because it is a terrible current load for the IC.

I'm 9 years late but it's a great video. A mini condenser mic can be used in the stead of the string box ehh? hehe

Very cool project. My immediate non-synth thought is to just prop up my breadboards (3 side-by-side on acrylic sheet) angled like this for better visibility.

You can also play around with the components to get the sound you want no more than 15% of all value resistors of online data sheets schematic do not go under the resistor values💖 using a little bit bigger mf caps will give you more Bass using smaller mf caps will give you clearer high level outputs I have played around with this chip quite a bit I've got all kinds of unique schematics for it. It is very diversital.

Rock on ✌️😂

You can also use a 10K verbal resistor such as a 10K pot between pin 1 and 8 to adjust your gain. Try it blessings you all are so cute💖 and you can use a 104 polyester film cap at the beginning of the input to help clean up any distorted sounds.

I have one and if they’re rare in the US then given I’m in Australia it’s probably even rarer ?? Is there still a market for these ???

Can I repair the touch sensor if it's not working